| Oscilloscope Specification |
| |
Model |
SDS6062 |
SDS7102 |
SDS8102 |
SDS8202 |
SDS8302/SDS9302 |
| Vertical System |
Vertical resolution (A/D) |
8 bits Resolution (2 channels simultaneously ) |
| Vertical sensitivity |
2mV/div～10V/div(at input) |
| Displacement |
±10div(5mV～10v) |
±1V(2mV～100mV), ±10V(200mV～1V),±100V(2V～10V) |
| Analog Bandwidth |
60MHz |
100MHz |
200MHz |
300MHz |
| Single bandwidth |
Full bandwidth |
| low frequency |
≥ 5Hz |
| Rise time (at input, typical) |
≤5.8ns |
≤3.5ns |
≤1.7ns |
≤1.17ns |
| DC gain accuracy |
±3% |
| DC accuracy(Average) |
Average﹥16: ±(3% rdg + 0.05 div) for △V |
| Measurement |
Cursor measurement |
△V and △T between cursors |
| Automatic measurement |
Vpp, Vmax, Vmin, Vtop, Vbase, Vamp, Vavg, Vrms, Overshoot, Preshoot, Freq, Period, Rise Time,Fall Time, DelayA→B , DelayA→B , +Width, -Width, +Duty, -Duty |
| Waveform Math |
＋, －, ×, / ,FFT |
| Waveform storage |
15 waveforms |
| Lissajou’s figure |
Bandwidth |
Full bandwidth |
| Phase difference |
±3 degrees |
| Communication interface |
USB, support USB flash disk storage, SVGA |
| Trigger |
Trigger level range |
±6 divisions from screen center |
| Trigger level accuracy |
±0.3div |
| Horizontal Trigger displacement |
Pre-trigger: 655 div,Post-trigger: 10 div |
| Trigger Holdoff range |
100ns～10s |
| Edge trigger |
Rising、Falling |
| Pulse Trigger |
Trigger condition |
Positive pulse：＞、＜、＝ negative pulse：＞、＜、＝ |
| Pulse width range |
24ns～10s |
| Video Trigger |
NTSC、PAL、SECAM |
| Slope Trigger |
Trigger condition |
Positive pulse：＞、＜、＝ negative pulse：＞、＜、＝ |
| Time setting |
24ns～10s |
| Alternate Trigger |
Edge, Pulse, Video, Slope |
| Waveform |
Waveform quantity |
1～1000 |
| record |
Interval time |
1ms～1000s |
| |
Display |
8" color LCD,TFT display,800x600 pixels,65535 colors |
| |
Power Supply |
100～240VAC RMS, 50/60Hz, CAT II |
| |
Power consumption |
< 18W |
| |
Dimension Weight |
340mm(L)×155mm(H)×70mm(W) 1.8kg (without battery) |
