DESCRIPTION
The RN42XV module by Roving Networks provides drop-in, certified Bluetooth connectivity for existing systems using 802.15.4 modules. Based on the popular 2 x 10 (2mm) socket footprint often found in embedded applications, the RN42XV offers a complete wireless solution for customers looking to migrate to a standard protocol without modifying existing hardware
The RN42XV Class 2 Bluetooth module is based on the RN42. This module supports multiple interface protocols, is simple to design in, and is fully certified, making it a complete embedded Bluetooth solution. With its high-performance, on-chip antenna and support for Bluetooth EDR, the RN42 delivers up to a 3 Mbps data rate for distances up to 20 meters.
The RN42XV is available in 2 antenna options:
- PCB trace antenna onboard the module (RN42XVP-I/RM)
- U.FL connector for external antenna (RN42XVU-I/RM)
This item is RN42XVP (PCB trace antenna)
Click here for the latest firmware
Starting with firmware 6.10, Roving Networks RN41, RN42, RN41XV and RN42XV modules support both SPP and HID in the same module. By default, the bluetooth module powers up in SPP profile mode. It can be switched to HID by issuing S~,6 command in CMD mode or by pulling high GPIO11 (Pin 9 on XV modules) during power up.
FEATURES
- Fully certified Bluetooth® module, supports version 2.1 + Enhanced Data Rate (EDR)
- Backwards-compatible with Bluetooth version 2.0, 1.2, and 1.1
- Pin compatible with widely used 2 x 10 2-mm socket typically used for 802.15.4 applications
- Low power: 26 µA sleep, 3 mA connected, 30 mA transmit
- UART (SPP or HCI) and USB (HCI only) data connection interfaces
- Sustained SPP data rates: 240 Kbps (slave), 300 Kbps (master)
- HCI data rates: 1.5 Mbps sustained, 3.0 Mbps burst in HCI mode
- Embedded Bluetooth stack profiles included (requires no host stack): GAP, SDP, RFCOMM, and L2CAP protocols, with SPP, HID and DUN profile support
- Bluetooth SIG certified
- Certifications: FCC, IC, CE
- Environmentally friendly, RoHS compliant
- 2 antenna options available: PCB trace antenna (RN42XVP-I/RM) and U.FL connector for external antenna (RN42XVU-I/RM)
APPLICATIONS
- Bluetooth replacement for 802.15.4 modules
- Cable replacement
- Barcode scanners/readers
- Measurement and monitoring systems
- Industrial sensors and controls
- Medical devices
- Computer accessories
- Asset tracking
SPECIFICATIONS
Bluetooth Versions
|
2.1 + EDR, 2.0, 1.2, 1.1
|
Data rate
|
With onboard stack: 300Kbps: HCI mode: 1.5Mbps sustained, 3Mbps burst
|
Frequency Band
|
2.412 - 2.484 GHz
|
Modulation Techniques
|
FHSS/GFSK modulation, 79 channels at 1MHz intervals
|
Profiles
|
SPP, DUN, HID, HCI, RFCOM, L2CAP, SDP
|
Supply voltage
|
3.3V ± 10%
|
Output power
|
+4dBm
|
Power consumption
|
Standby/Idle 25 mA : Connected (normal mode) 30 mA : Connected (low power Sniff) 8 mA : Standby/Idle (Deep sleep enabled) 26 µA
|
Operating temperature range
|
-40C to +85C
|
Interface
|
UART, USB, Bluetooth
|
Antenna
|
PCB trace or U.FL connector
|
Size
|
0.96" x 1.15"
|
Weight
|
5.5 grams
|
Certifications
|
FCC, IC, CE, Bluetooth SIG
|
RESOURCES