Color LCD 128x128 Nokia Knock-Off

Manufacturer sku: LCD-00569

Description: Finally! Color LCDs you can afford and play with! Yet another product based on an SFE customer request, this 128x128 mini color LCD is a perfect match for your next portable application.

What we've found over in China is a 'copy' of the Nokia LCD found in models 6100, 6610, 7210, 7250, and 5100? We don't know what phones it fits, and we don't really care. This inexpensive LCD comes with a powerful white LED backlight and a relatively simple serial interface. It's a 9-bit interface, so beware. But we were able to get the LCD up and running on a LPC2138 with a few hours worth of work.

Please note: This LCD is meant to replace a broken screen in a cell phone. The connector (both on the LCD and on the PCB) was not designed for multiple attachment/detachment. Please secure your LCD is place with double stick tape to prevent stress on these connectors. This LCD is small! Please see the comparative photos. With that said, it is still superbly readable at arms length (cell phone technology).

We've got the LCD and example C code for $20. You really can't say no! We even sell the loose connector for $2 in case you are worried about soldering the tight 0.5mm pitch.

Frame Dimensions: 1.35x1.58"
Active Display Dimensions: 1.2"x1.2"

Features:

• LCD Logic - 3.3V @ 2-3mA
• LED Backlight - 7V @ 40-50mA (very bright)
• Full 4,096 Color Display
• Uses the Epson S1D15G10 or Philips PCF8833 Controller

Documents:

• Latest LPC2148 example code from SFE, works with both controllers
• Latest ATmega8 example code from SFE, works with Epson controller
  
• Interface tutorial by Jim Lynch
• Epson Controller Datasheet
• SFE Eagle Library has this part!
• The holy grail forum posting for this Nokia type LCD
• Example Pixel Control of LCD
• Example Parallax Stamp BS2 Code - Thanks Terry! Screenshot
• Example ATMega32 Code - Thanks Jimbo!
• Example SAM7-P64 ARM Code - Thanks again Jimbo!
• Example 3D Graphics project on a PIC
• Example ATMega644/128/32/16 code - Care of Cathy
• Example Gumstix Interface - Thanks Areth
• Example PIC 16F87x code for CCS Compiler - Thanks Marcus
• Example PIC 18F4550 USB - Thanks Francesco
• Example 4096 Color Control - Beautiful! Thanks Loren Blaney
• Example Linux Driver - Thanks Zsolt
• Bitmap Converter - Thanks Sebastian

Pin Out (see picture):

1. VCC-Digital (3.3V)
2. RESET
3. SDATA
4. SCK
5. CS
6. VCC-Display (3.3V)
7. N/C
8. GND
9. LED GND
10. LED V+ (6-7V)