This product is out of production. Please, order the new XBee shield version 3 kit

The XBee shield is a product developed by Libelium together with the Arduino team. It is a shield that, mounted on the Arduino board, allows to establish wireless communication between different devices.  More Information.

This kit includes the second version of the XBee Shield, developed by NKC Electronics.

Assembly Guide

Note: Thank you Paul Keutelian for creating the excellent assembly guide!.

NEW FEATURES:

• 3-LED RSSI (Received Signal Strength Indicator)
• XBee module firmware upgrade jumpers
• XBee module reset button
• Blue Associate indicator LED
• All digital I/O pins exposed using a long leg female header
• Analog input pins exposed using a long leg female header
• ICSP signals exposed using a long leg 2x3 female header
• 100% compatible with XBee Shield V1.0

Arduino XBee Shield V2.0 Kit
Parts	Qty	Device
PCB	1	Arduino XBee Shield V2.0 PCB
J1, J2	2	10-pin female 2mm header
IC1	1	TLV2217-33 3.3V LDO regulator
ICSP	1	2x3 female socket
C1, C4	2	100nF capacitor
C2, C3	2	10uF Ecap
C5	1	1uF Ecap
T1	1	BC547
SW1, XBee rst	2	Tactile switch
HEAD	1	10-pin breakable male header
R1	1	10K resistor
R2	1	15K resistor (or aproximate value)
R3, R4	2	1K resistor
R5	1	100K resistor
R6, R7, R8	3	470ohm resistor
R9	1	68K resistor
R10, R11	2	56K resistor
R12	1	150K resistor
IC2	1	14-pin IC socket, LM339N IC
rssi LEDs	3	3mm LED
Associate	1	3mm Blue LED
Shunt	4	Jumpers

Note: XBee Module not included

---