With new firmware: 113-08501-130
The FG085 is a low cost yet versatile function generator capable of producing signals of many common waveforms.
As an easy-to-use tool operation of FG085 is very simple and straightforward. It is an ideal test/experiment tool for electronic hobbyists and students.
This is another kit version of FG085 that has panels. All SMT parts have been pre-soldered on PCB. MCUs on board have been pre-programmed.
Through-hold components are to be installed by users. Soldering skill is required to assemble the kit.
Generating continuous waveforms of Sine, Square, Triangle, Ramp (up and down), and Staircase (up and down)
Generating user defined arbitrary waveforms (AWG)
Generating frequency sweeping signals of selected waveforms. Start frequency, stop frequency, and sweep rate can be independently set
[ NEW with firmware version 113-08501-120 or later] [ Video ]
Generating servo test/control signals in micro-second resolution with user programmable pulse width, amplitude, and cycle
Setting of frequency (or period), amplitude, and offset is done with digits - quick and straightforward
Variable duty cycle from 1% - 100% for square signal
Frequency (period), amplitude, and offset can be incrementally adjusted with rotary encoder
Incremental step size can be set to any value. Very convenient for quickly adjust frequency/cycle arount a certain point or
over a range [ NEW with firmware version 113-08501-110 or later]
Trigger input available
Synchorous output available for sweeping mode
Settings are memorized after power down.
Can be used as an adjustable DC voltage source by setting frequency to 0
Frequency range: 0 - 200KHz (Sine)
Frequency resolution: 1Hz
Period resolution: 1ms
Maximum frequency error (CW mode): 0.1490Hz for F > 40Hz, 0.000596Hz for F <= 40Hz
Maximum frequency error (Sweep mode): 0.1490Hz
Amplitude range: 0 - 10V peak-to-peak
Amplitude resolution: 0.1V
Offset range: -5V - +5V
Offset resolution: 40mV
Memory depth: 256 bytes
Sample rate: 2.5Msps
Trigger input level: High - 3.5V (min), Low - 1.5V (max)
Output delay at trigger: < 5us (when no panel operation)
Sync Output Level: 5V TTL
Output impedance: 50 ohm
Power supply voltage: DC 15V (maximun 16V DC)
Current comsuption: < 150mA (without loading)
Dimension: 155 X 55 X 30 mm
Net weight: 100 gram
Documents, firmwares, and tools: